However, softening is only the beginning.
Even if the non-melting stone is metalized, its fire resistance is still terrifyingly high.
Under Ye Li's control, the earth fire perfectly wrapped the metalized infusible stone, and the blazing heat burned its surface redder and redder.
Half an hour later, the unmelted stone finally showed signs of melting, and a little bit of metal solution dripped from the surface of the unmelted stone.
Ye Li felt that the metallized infusible stone showed no signs of reverse transformation, which meant that the effectiveness of the golden solution would still last for a long time, and the infusible stone would not become petrified in a short period of time.
Ye Li felt the changes in the non-melting stone, and finally felt relieved.
As long as the non-melting stone can melt, everything will be easy.
It took a full hour for this huge non-melting stone to finally melt into a ball of crimson juice.
Ye Li casually threw the horns of the big red flame dragon into the flames, and then threw various auxiliary materials, as well as wind, wood and yang materials into the fire one after another.
The flames licked various materials.
The rich and pure earth fire was extremely hot.
Ordinary materials could not withstand the power of the flames.
In just a quarter of an hour, all the materials were melted into juice.
After melting, it is a process of fusing various materials, which requires the spiritual power of the spirit master to be strong enough and the control ability to be precise enough.
Only in this way can various materials be perfectly separated and evenly blended together.
Let the textures of all materials blend together, and the characteristics of each other can be perfectly combined.
If the fusion is uneven and the materials are unevenly distributed, the difference in hardness on the surface of the cast furnace is enough to cause the entire furnace to shatter as it cools.
Moreover, uneven materials make it difficult to guide the formation of rune formations, which basically means casting failure.
As a master caster, Ye Li naturally understood this very well, so at this time, his energy was completely focused on the earth fire in front of him, controlling the material juice to rotate rapidly in the flames.
The high-speed rotation of the juice caused all the juice to turn into vortexes, and finally blended together.
Each material is slowly combined with other materials, wrapping and intertwining with each other.
In the end, a ball of pure and uniform red-red liquid appeared in front of Ye Li.
A slight smile appeared on Ye Li's lips.
He knew very well that all the materials had been perfectly blended together.
Now is the time for shaping.
The shape of a casting furnace quickly appeared in Ye Li's heart.
This is a casting furnace in the shape of a square tripod.
The furnace is square and supported by four legs.
At first glance, it looks like a square statue. tripod.
The shape of the Fang Ding is very simple, which can also save Ye Li a lot of time.
After all, if Ye Li wants to create a unique casting furnace, it will definitely consume a large part of his time.
Ye Li knew very well that the effectiveness of the Midas Touch wouldn't last too long.
If he couldn't complete the casting furnace within a few hours, once the Midas Touch expired, the casting furnace would be finalized immediately, and he wouldn't be able to do anything by that time.
In the hardened square tripod, if the pattern direction is changed, the casting furnace will be completely scrapped.
Among these materials, other materials are easy to say, but the non-melting stone is really hard to find.
If this piece of non-melting stone is lost, Ye Li really doesn't know where to find another one of this size.
After quickly shaping his body, Ye Li immediately became more energetic and began to speed up the formation of movement guide lines.
In this casting furnace, the effectiveness of the power of fire is not the most important, because the main flame used by the furnace is earth fire.
When there is no earth fire, the flame generated by itself is used.
The purpose of Ye Li using the two horns of the Big Red Flame Dragon is because the two horns of the Big Red Flame Dragon have the property of gathering fire and have a strong effect on gathering earthly fire.
After guiding the Fire Elemental Fire Gathering Formation and Fire Making Formation first, Ye Li opened the Eye of Origin again.
The other attributes of the formations are auxiliary functions, so they need to be combined with the Fire Elemental Formation.
The more auxiliary formations connected around the main body, the higher its complexity will be.
For ordinary casters, the main rune formation can only be connected to an auxiliary formation of one attribute at most, but Ye Li plans to connect three auxiliary formations to the main rune formation.
The auxiliary formations of wind, wood and yang are all designed to bring out the power of fire to the end.
Free novels bring you joy and joy ---> storyskyline.net
Ye Li relies on the effectiveness of the Eye of Shiyuan to draw these three formations to the most perfect state. .
Of course, in fact, with his current level of casting, he can draw the formation extremely perfectly even without the help of the Eye of Origin.
It's just because Ye Li attaches great importance to the Heaven-Destroying Bow and is unwilling to make any mistakes in the casting furnace, so he activates the Eye of Primeval to make all preparations as perfect as possible.
With the help of the Eye of Primeval, the patterns of the foundry furnace were guided and drawn at an extremely fast speed.
An extremely complex and huge rune formation gradually took shape in the square tripod.
Every rune line appeared in the most perfect place.
Ye Li's ability combined with the special effect of the Eye of Origin allowed him to maximize the power of the casting.
It took almost two hours to finally complete all the rune formations.
At this time, Fang Ding also began to show signs of petrification again.
The effectiveness of the Golden Touch was gradually disappearing, and the unmelted stone would return to its original appearance.
Although the non-melting stone at this time has been mixed with other materials, it still plays the most important role as the main body.
The gradual petrification of the non-melting stone automatically lowered the temperature of the Fang Ding.
The red color on the square tripod began to slowly disappear, as if it was gradually cooling down.
At this time, Ye Li did not extinguish the flame as in the last step of the ordinary casting process.
Instead, he frantically activated the power of the earth fire in the formation to burn the Fang Ding in front of him which gradually became dim.
The unmeltable stone is indeed the unmeltable stone.
Even such a fierce fire cannot shake Fang Ding at all.
The burning flames did not cause even the slightest change on the surface of the square tripod.
The gray-black casting furnace remained motionless in the flames.
The flames indeed seemed very weak in front of the non-melting stone.
Ye Li was very satisfied with this, because he knew that when the power of the flames in the casting furnace was fully exerted, the temperature would be higher than the previous earth fire.
Ordinary casting furnaces are absolutely unable to withstand such a high temperature and long-term calcination.
The rune formations in the furnace will lose their effectiveness due to the gradual deformation of the furnace body, and the casting will also stop as a result. .
Now that there is a casting furnace that casts non-melting stone, no matter how high the temperature of the flame is, the furnace will not be destroyed.
No matter how long the casting process of Mietian Bow lasts, there will be no problems.
It takes a genius to remember the address of this website in one second:.
Mobile version reading URL::