Chief Engineer Tang Weiwen looked at Shen Huan and said: "I would like to ask Comrade Shen Huan, if our H-6 aircraft or Yun-8 aircraft adopt pulsating production technology, then how should we divide the location?"
” Shen Huan groaned: "Master Tang, I can only imagine this, I think it can be roughly divided into five work areas, and one camera is a work area."
For example, Workspace 1 is a pre-assembly area for the storage of major large components; The No. 2 working area can be used for the final assembly of several major components, including the front fuselage, the middle and rear fuselage, as well as the left and right wings and tail section; In area 3, the landing gear engine and other ancillary components can be installed, as well as the final installation of the floor, piping and hydraulics; The No. 4 working area can complete some installation work inside the body, as well as the installation of auxiliary power; Work area 5 is mainly used for various test work.
I don't know much about aircraft manufacturing, it's just a little immature idea of mine!
” Hearing Shen Huan say this, several chief teachers showed surprise and looks on their faces, and Chief Master Tang Weiwen said even more excitedly: "Great, I think so too!"
I think we can divide the beat of the final assembly line according to the different models of each model, and carry out a comprehensive process flow combing to make the final assembly process more reasonable, so as to meet the basic requirements of the pulsating production line. ” Chief Engineer Zhang Hong also echoed: "Yes, yes, I think we must first analyze the assembly sequence of each component in the general assembly process, and then optimize the assembly path and sequence, turn a single serial operation into a parallel cross operation, and pull the aircraft assembly progress according to the beat, which should be the core idea of the pulsating production line, right?"
” Shen Huan nodded and said, "Yes, the chief teachers seem to be the same as I think."
Our pulsating production line will distribute components and other materials to the work site before the start of construction, and the workers will go to the on-site shelves to collect them according to the production needs when the work starts, so as to reduce some time waste.
Therefore, the pulsating production management team needs to take the lean manufacturing idea as the core of the guiding ideology, and implement the responsibility mechanism and adjust the improvement mechanism for the operation of the pulsating production line, so as to truly realize the pulsating production. ” Chief Engineer Yang Wei said: "So, as you said when you introduced the situation just now, the site must be visually managed, which I think is very important.
I think that if each station on the work site is equipped with a visual electronic display platform, the management team can carry out real-time temporary control of the process completion of each station, grasp the work plan of each station, and quality information.
Therefore, in terms of the configuration of informatization and digital equipment, it is indeed a key point and a difficult point!
” The small conference room was very lively, and everyone talked freely and discussed the pulsating production line, whether it is shipbuilding or aircraft manufacturing, the two are actually connected. …… Two days later, Shen Huan was invited by Chief Engineer Tang Weiwen to visit Xifei, of course, there were two people with him, one was Fu Jianjian, chief engineer of Jiangnan Changxing Shipbuilding Group, director of the Technology R&D Center, and the other was Shen Huan's girlfriend Lin Miaoyu.
This time I went to Xifei for exchanges, which can be said to have opened a new chapter in the cooperation between the two industries of aviation port and shipbuilding port!
This is also what Shen Huan did not expect, Chief Engineer Tang Weiwen seems to be eager to build the world's first aircraft pulsating production line!
After arriving at the ancient city of Xi'an in the northwest, Shen Huan and they were arranged by Tang Weiwen to live in the Xifei Hotel in the city, the location here is very good, and it is more magnificent than the hotel of Jiangnan Changxing Shipbuilding Group, it is a ten-story building, Shen Huan who lives on the top floor, they can see many antique buildings in the ancient city in the room.
Xi'an is worthy of being the ancient capital of the Six Dynasties, and there is also the cradle of China's aviation industry designers - Northwestern Polytechnical University.
Mr.
Tang Weiwen graduated from Northwestern Polytechnical University, and his work unit is also here, which can be said to be very good.
It was already evening when Shen Huan and the others arrived in Xi'an, so after staying in the hotel and eating, Chief Tang didn't stay long, because he knew that Shen Huan and they were also tired, so they had to rest for a night, and they would take Shen Huan and them to Xifei tomorrow to visit and exchange!
Before Shen Huan could sleep, Fu Jianshe came to his room to find him.
Shen Huan was also a little surprised, how could Mr.
Fu come to him.
Fu Jianshe smiled and said: "Comrade Shen Huan, I want to talk to you, we are invited to visit and exchange this time, and we have to help Master Tang and them no matter what!"
” Shen Huan nodded and said, "Mr.
Fu, it's okay, in fact, I'm not sleepy, just say what instructions you have!"
” Fu Jianshe said with a smile: "There are no instructions, I just think you seem to have a deep understanding of the aviation industry, so I want to ask, do you think our country's aviation industry can really use pulsating production lines?"
If they also have a pulsating production line, will they really be able to catch up with the level of the world's aviation powers?
” Shen Huan couldn't help but think of more than ten years later, China not only has the fifth-generation fighter J-20, but also has the great Kunpeng Yun 20, of course, the country's heavy weapon H-20 will also be launched, in addition to the field of military aviation, the civil aviation field is also the result of fruitful results, the domestic large passenger aircraft C919 completed its first flight, and the larger wide-body passenger aircraft C929 has also entered the design stage, it can be said that the future prospects of China's aviation industry will even be better than the shipbuilding industry.
Thinking of those aviation products that shocked the people of the United States, Shen Huan couldn't help but feel confident, he nodded and said: "Mr.
Fu, I believe that the aviation people of our country can do it."
And the pulsating production line, can indeed play a huge role in the development of our country's aviation industry, although it may not be as subversive as the shipbuilding industry, but it is definitely a magic weapon to catch up with the world's advanced level!
Pulsating production line, I think those advanced aviation manufacturing enterprises in the United States must also be researching, now it depends on who comes out first. ” Fu Jianshe said excitedly: "If our country preempts the United States and gets the pulsating production line of aircraft manufacturing out, it will be great, and the people of the United States will definitely feel like they have been slapped in the face!"
Hahaha, our aviation people can also raise their eyebrows once!
” Shen Huan also laughed and said: "Yes, but it is really difficult for us to achieve the pulsating production of aircraft before the people of the United States, and it will definitely encounter many difficulties to break through this key technology." ” Fu Jianshe sighed with emotion: "Yes, I also know that something like this innovation cannot be smooth sailing, no matter how difficult the road ahead is, even if it is a mountain of swords and a sea of fire, we have to go through!"
”