You have a new Amazon product recommendation

Chapter 370: The Controversy over the Pulsating Production Line


Since the start of the construction of the Type 022 missile boat, and the pulsating production line has been officially put into use, within the Jiangnan Changxing Shipbuilding Group, there have been two different voices, some people believe that although the pulsating production line is very advanced, it is too advanced, and most importantly, due to the use of industrial robots, instead of the work of many workers, so the workers who enter the pulsating production line are 80% less than the traditional construction method, that is, 500 workers are originally needed, Now only a hundred workers are enough.

This has led to a problem, that is, Jiangnan Changxing Shipbuilding Group originally had a lot of redundant personnel, and after having a pulsating production line, it needed fewer workers, that is, there were more redundant personnel.

You must know that Jiangnan Changxing Shipbuilding Group was already a large-scale state-owned enterprise in the era of planned economy, and as a century-old factory, its burden is very heavy.

In the history of Jiangnan Changxing Shipyard, the maximum number of regular employees once reached 14,000!

Although through efforts over the years, a lot of redundant staff has been reduced, and the number of regular employees has been reduced to about 10,000.

However, the number of outsourced workers working in Jiangnan Changxing Shipbuilding Group all year round has reached 4,000 people, in fact, the number of people has not decreased, but many have changed to the mode of outsourced workers.

The model of outsourced workers began to prevail in the nineties, especially in those private local shipyards, the proportion of outsourced workers is much higher than that of large state-owned shipyards such as Jiangnan Changxing Shipbuilding Group, and even some shipyards, most of which are outsourced workers, have only a small number of management personnel and technical personnel.

Of course, where did the people minus the Jiangnan Changxing Shipyard go?

They have all become retired workers, and these retired workers are the problems left over from the special historical period of Jiangnan Changxing Shipbuilding Group, and Jiangnan Changxing Shipbuilding Group has to increase a very huge expenditure every year for this reason.

And the foot basin country shipyard, or stick country shipyard, which has the same production capacity as Jiangnan Changxing Shipbuilding Group, has only about 1,000 employees!

This is a very large gap, which directly leads to the huge pressure on Jiangnan Changxing Shipbuilding Group in terms of financial burden.

With the economic development and the improvement of people's living standards, the wages and bonuses of workers are also rising, and welfare expenses such as year-end bonuses and festival expenses are also rising.

At the end of the nineties and the beginning of the twenty-first century, many positions within Jiangnan Changxing Shipbuilding Group were set up because of people, and to support so many people, there were more posts!

So in this case, it's actually quite contradictory.

On the one hand, there are too many employees in Jiangnan Changxing Shipbuilding Group, and many times several people do one person's work, but on the other hand, it is necessary to outsource three or four thousand outsourced workers to engage in those jobs with heavy physical strength, poor environment and great occupational health hazards.

This has led to many workers holding a kind of thinking of eating a big pot of rice, which is extremely unfavorable to the future development of the company.

It is precisely the pulsating production line that has been put into use in Jiangnan Changxing Shipbuilding Group, which has caused such a problem, that is, because it is too advanced and the degree of automation is too high, the number of workers required is very small.

Therefore, there are many workers with outdated ideas, and even some managers, who hold the view that the pulsating production line is to make them unemployed!

Especially among outsourced workers, this idea is more common, because many jobs that are not easy to do that should be done by outsourcers are done by industrial robots.

This is equivalent to a pulsating production line, and industrial robots have robbed them of their jobs.

Of course, there is also a voice, and that is to praise the pulsating production line.

You must know that the pulsating production line is a milestone innovation in the entire world's shipbuilding industry, which makes many old Jiangnan Changxing people find the glory of Jiangnan people many years ago!

Back then, the Changxing Shipyard in Jiangnan opened a precedent for China's modern industry, smelted China's first furnace of steel, built the first artillery, the first seaplane, the first export of 10,000-ton ships to the United States, and trained China's first batch of industrial workers and the first batch of engineering and technical personnel.

Entering the new era, Jiangnan Changxing Shipyard has also been the leader of China's shipbuilding industry for a long time.

Whether it is China's first-generation submarine or the first 10,000-ton ocean-going freighter, it is the pride of Jiangnan Changxing people.

After the reform and opening up, Jiangnan Changxing Shipyard is also the first domestic shipyard to enter the international ship market.

But now, Jiangnan Changxing Shipbuilding Group is still lagging behind several domestic shipyards, such as Waigaoqiao Shipyard, Dalian Shipyard and so on.

Of course, this is also related to the positioning of Jiangnan Changxing Shipbuilding Group, because Jiangnan Changxing Shipbuilding Group is positioned as a military product, and at the same time vigorously develops civilian ships.

If it weren't for the past three years, Jiangnan Changxing Shipbuilding Group has received several large orders in the field of high value-added and high-tech ships such as liquefied gas carriers, and it is impossible to leap to the forefront of domestic shipyards.

Shen Huan also heard different voices within Jiangnan Changxing Shipbuilding Group, but his determination to develop pulsating production line technology did not waver, because he knew that next, Jiangnan Changxing Shipbuilding Group must seize the opportunity to complete a perfect leap forward in order to stand at the forefront of the shipbuilding industry.

In Shen Huan's memory, in the next few years, because of the relocation of Jiangnan Changxing Shipbuilding Group and the large increase in military ship orders, Jiangnan Changxing Shipbuilding Group's ranking in domestic shipyards has also been declining, and by 2011, it has ranked eighth.

The pulsating production line will be the core competitiveness of Jiangnan Changxing Shipbuilding Group in the future!

Take the pulsating production line of the 022 missile boat as an example, Shen Huan knows that this new type of missile boat will be equipped in large quantities, and the number of equipment will not be less than 100 when it is discontinued!

What is this concept?

The cost of a 022 missile boat has reached as much as 50 million, even if Jiangnan Changxing Shipbuilding Group undertakes the construction of two-thirds of the 022 missile boats, there will be more than 60 ships, and the total output value can reach 3 billion, which is equivalent to the total output value of Jiangnan Changxing Shipbuilding Group in the past year.

And after the construction of the Type 022 missile boat needed by the Navy, this kind of missile boat is very promising to be exported after improvement, and the order will definitely not be less at that time, because now the Type 022 missile boat is born at the right time, and the export is still relatively promising.

Even if there is no export, in the future, this pulsating production line can also be used to build small passenger ships, because the production efficiency of the pulsating production line is extremely high, which will form an absolute suppression of those traditional competitors.